* add FireProtection system and event
* minor optimisation + make flammable use fire protection event
* add fire protection values to some things, nerf firesuit heat resistance
* bruh
* unrevert laser nerfs, make elite hardsuit fully fireproof
---------
Co-authored-by: deltanedas <@deltanedas:kde.org>
* Moved GasMixture to shared
* Temp Fix for sandbox violation, idk why Array.Resize isn't working properly. It's already sandboxed.
* The most powerful webedit in history
The gas analyzer now shows the volume of pipes, tanks, canisters and the environment.
Adjust gas analyzers so that the volume and number of moles shown corresponds to only the scanned element, e.g. a canister or single pipe in a pipenet.
(cherry picked from commit 5a5efa11cf1d68708a70d48a286cb97fde96afdf)
The math for our pressure damage (barotrauma) system is directly taken from TG. The constants are the same and the math is almost the same. However there are two errors.
1. Pressure damage started being applied within the WARNING bounds, rather than the HAZARD bounds. This means you started taking low pressure damage at 50 kPa instead of the intended 20 kPa, and also the HUD icon didn't show "danger" like it should even if you were already taking damage.
2. The calculations for high pressure damage were wrong. These are supposed to be linearly scaled, but the function was wrong so the scaling didn't actually work properly (especially when considering the fixed bounds above). This appears to be the case because the function was taken from an incorrect comment in the original source, rather than the real math.
Both of these issues are now fixed to match the TG behavior. Note that this somewhat nerfs pressure damage in non-extreme circumstances. e.g. a room at 40 kPa now gives NO pressure damage, whereas previously it would do full space damage.
The description of the pressure alerts is wrong for "low" severity, but I can't be arsed to fix that right now. Alerts don't have a way to change the description depending on severity...
(cherry picked from commit b5138b245e1782cc062b9bdf165600b7974e9ed7)
Also includes some (non critical) changes to the solution file to re-organize the Roslyn components.
(cherry picked from commit e00f74505c62310bd15aeaba8d6530f648397074)
* LockVisualizer
* Fix state
* Clean some code
* Make it component, fix tests fail
* Fix for StateUnlocked
Now it is possible to manually set the unlocked state and it will work!
* Optimize LockVisualizer, add check for unlocked state
* No todo I guess
(cherry picked from commit c7870882f6f956eea07cbb4738ae45c8805c8ce6)
* Firestarter fixes
- Actually networks the action.
- Namespace fixes.
* No networky for you
(cherry picked from commit a6ea8b210db079d30823e7b4d8faa32aefa17582)
* Grave digging and decomposition
* fix
* update based on review comments
* code review
* remove unused field
(cherry picked from commit fd7ff690b1ad7b1cf6cd62deba3076684e3e9282)
* Give .props files 2-space indents.
* Move to Central Package Management.
Allows us to store NuGet package versions all in one place. Yay!
* Update NuGet packages and fix code for changes.
Notable:
Changes to ILVerify.
Npgsql doesn't need hacks for inet anymore, now we need hacks to make the old code work with this new reality.
NUnit's analyzers are already complaining and I didn't even update it to 4.x yet.
TerraFX changed to GetLastSystemError so error handling had to be changed.
Buncha APIs have more NRT annotations.
* Remove dotnet-eng NuGet package source.
I genuinely don't know what this was for, and Central Package Management starts throwing warnings about it, so YEET.
* Remove Robust.Physics project.
Never used.
* Remove erroneous NVorbis reference.
Should be VorbisPizza and otherwise wasn't used.
* Sandbox fixes
* Remove unused unit test package references.
Castle.Core and NUnit.ConsoleRunner.
* Update NUnit to 4.0.1
This requires replacing all the old assertion methods because they removed them 🥲
* Oh so that's what dotnet-eng was used for. Yeah ok that makes sense.
* Add Robust.Analyzers.Test
* Update submodule
* commit to re-run CI
(cherry picked from commit a6c9c36b688a1ba78ff4c12502e81661cf607b6c)
* Check for divide by near zero (#22876)
* Clamp after AdjustMoles() (#22907)
Clamping is needed because x - x can be negative with floating point
numbers. If we don't clamp here, the caller always has to call
GetMoles(), clamp, then SetMoles(), which makes this function not very
useful.
* Add maximum atmos temperature limit (#22882)
* Add Tmax
* Increase Tmax
* Revert "Add YAML gas reactions (#22803)" (#22939)
This reverts commit 054321d2c2c17eb55a1640150131c61c29a3eb2b.
Co-authored-by: Kevin Zheng <kevinz5000@gmail.com>
---------
Co-authored-by: Kevin Zheng <kevinz5000@gmail.com>
Co-authored-by: Kara <lunarautomaton6@gmail.com>
MinimumTemperatureDeltaToConsider sets the minimum temperature
difference for a heat capacity calculation to be run. The problem is
that when heating up large quantities of gas (e.g. with a heater), a
small dT becomes an even smaller dT when running DivideInto(). This
means that small changes in temperature are completely ignored.
* Basic TEG start.
Connects via node group.
* Basic TEG test map
* Sensor monitoring basics, TEG circulator flow
* Basic power generation (it doesn't work)
* More sensor monitoring work
* Battery (SMES) monitoring system.
* Sensor monitoring fixes
Make it work properly when mapped.
* Test map improvements
* Revise TEG power output mechanism.
Now uses a fixed supplier with a custom ramping system.
* TEG test map fixes
* Make air alarms and pumps open UI on activate.
* Clean up thermo machines power switch.
Removed separate Enabled bool from the component that always matched the power receiver's state.
This enables adding a PowerSwitch component to give us alt click/verb menu.
* TEG but now fancy
* Make sensor monitoring console obviously WiP to mappers.
* Vending machine sound, because of course.
* Terrible, terrible graph background color
* Examine improvements for the TEG.
* Account for electrical power when equalizing gas mixtures.
* Get rid of the TegCirculatorArrow logic.
Use TimedDespawn instead. The "no show in right-click menuu" goes into a new general-purpose component.
Thanks Julian.
* Put big notice of "not ready, here's why" on the sensor monitoring console.
* TryGetComponent -> TryComp
* Lol there's a HideContextMenu tag
* Test fixes
* Guidebook for TEG
Fixed rotation on GuideEntityEmbed not working correctly.
Added Margin property to GuideEntityEmbed
* Make TEG power bar default to invisible.
So it doesn't appear in the guidebook and spawn menu.
Emergency tank: 4 minutes (down from 12)
Extended Etank: 9 minutes (down from 37)
Double Etank : 15 minutes (down from 62)
Full tank : 31 minutes (down from 94)
This will make it so EVA crews actually need to watch their pressure if they spend significant time outside the station, and/or have a canister in their general vicinity.
Emergency tanks can no longer be used on timescales that far exceed escaping an emergency situation, but will probably be insufficient in extended emergencies, where access to canisters will now be much more important. How well this works in practice will have to be carefully watched.
* Space sections fractionally slower (1 sec, exponential)
- ExplosivelyDepressurize reduces air pressure by about 20% each pass, sets to vacuum below 20 kPa
- Causes some issues with AdjacentBits on airlock close
* Introduced constants for Spacing in atmospherics
* Limit space wind allowed during spacing to 1000 kPa per tile/sec
- Less tile ripping per tick
- Tiles rip based on wind
- Robustness checks
* Slowed down the spacing a bit
* Slowed down the spacing a bit more
* Better dynamics about high pressure air escaping,
- Reduce air temperature (due to decompression) during spacing
- Make some water vapor for flavor
* Limit temperature loss to >8 Deg.C. No Water vapor
DrSmugleaf
deltanedas
Leon Friedrich
Jezithyr
slarticodefast
Pieter-Jan Briers
Menshin
MilenVolf
metalgearsloth
Kara
router
DrSmugleaf
themias
Kot
Debug
Kevin Zheng
username
Ed
Ilya246
Errant
Nemanja
c4llv07e
Tom Leys